The high-speed disperser machine rotating a maximum of 3000rpm, Within such high speed, rotating, the disc makes the materials in a vortex and pull the materials to the edge of the disc, In this process, the materials in the drum are fully dispersed, dissolved and sheared and also emulsified by the disc, By the hydraulic lift system, the shaft lifts up and down, Therefore, all the materials in the drums are well mixed and dispersed, The total process is with short time but high efficiency, It reached continuous production produce a request.

Application and Introduction of High-speed Disperser

High-speed disperser is with quick dispersing, homogenizing, shearing and mixing function, can be used on mass production of liquid materials, which is widely used in Paint, printing Ink, pigment ., emulsion, chemicals .dye stuff .food, adhesive, fertilizer and so on.

The disperser is with a disperser disc drive by the shaft connected with the driving part, The disc rotating with high speed and the materials touched the disc .will be mixed by the smaller size. The disperser is ideal for dispersion that the material viscous up to 50000 centipoise, It is the best disperser for liquid materials.

Especially the high-speed disperser for paint, It is widely used in water-based paint industry, it is the best choice for different paint materials premix and dispersion, This paint mixer is suitable for mass paint production, and it is the economic choice.

High speed dissolver that Allwin manufacture and export are made available. These equipment are primarily used for premixing enamels before passing through sand mills, dispersion of water-based emulsions and finish paint blending. Dispensers supplied by us can efficiently premix, and grind, and deliver a homogenized mixture. Effects of the mixing and equalizing are optimum due to little absorption and reservation of air during stirring and dispersing of the material. If stirred and dispersed at medium or fast speed, the materials fed into the machine will be dissolved quickly and their granules will become smaller. Owing to their optimum performance, these processing equipment find widespread application in industries engaged in manufacturing products such as paints, emulsion, printing inks, chemicals and many more. Furthermore, our high-speed dispersers are also employed in the processing of primer, putty, and distemper.

The Allwin’s High-Speed Disperser is built with all of the features and versatility required to produce a wide variety of products. This age old design has been refined and updated for longer life, improved performance and reduced maintenance costs.

High-Speed Dispersers are perfect for viscous dispersions. High-Speed Dispersers are most often used for chemical, paint, ink and specialty coatings applications. When used in conjunction with Multi-Shaft Mixers, they can be used for products up to several hundred thousand centipoise.

Dispersers are available from benchtop sizes to very large production sizes capable of dispersing several thousand gallons at a time.

In a sand mill, a central bar agitates the sand, causing it to have a grinding action. Many sand mills produce very small particles on the first pass, with the particles passing through a mesh screen. Others have recapture systems, allowing people to pass the mixture through the sand mill again to make it finer and more even. The design works by agitating the sand, rather than creating pressure, ensuring that the grinding medium does not break apart in the device when it is used properly.

As the name implies, sands can be used as grinding media, but other materials may be used as well. The choice of medium depends on the material being ground. Some companies maintain several mills dedicated for specific uses, while others may change media as needed in a single sand mill. Sand mills are used in cosmetics manufacturing, the production of paints and pigments, and similar activities.

In the case of mixtures, sand mills can be used to run a mixture of components through for processing into a uniform paste or powder. This is widely applied in the production of paints, where pigments need to be ground with stabilizers and other components before being blended with a base. As the ingredients pass through the sand mill, they become thoroughly mixed. The very fine grind offered by this device allows for highly stable mixes without patches and chunks of various materials.

Companies with need for a sand mill may be able to rent or lease equipment for their needs, offering an opportunity to test different kinds of equipment before making a decision to purchase. It is also sometimes possible to buy used and refurbished equipment from a manufacturer or third party. Brand new sand mills can be very expensive. Grinding media are available from sand mill manufacturers, as well as other suppliers. The operator must select the best medium for a given application, weighing a number of considerations, including concerns about contamination and discoloration.

A sand mill is a piece of industrial equipment designed to grind a given material into very small particles of roughly equal size. Sand mills are used for processing a wide variety of products, and can also be used as mixers and dispersants, creating a uniform mixture of several components during the grinding process. A number of companies produce sand mills for various applications, including different designs and sizes to meet the needs of various applications.

Tungsten carbide mining tools, including buttons, tips, inserts, drilling bits, etc, with high performance, are widely used in oilfield drilling, snow removing, snowplow machine and other much more mining equipment, such as roller drill bits, DTH drill, geological drilling tools.

XYMJ, which is one of the most professional carbide mining tool manufacturers in China, provides carbide buttons, cemented carbide tips & inserts, with various types and specifications, customized service as the drawings also available.

The carbide buttons, inserts and tips are produced adopting 100% tungsten carbide, with stable product performance. The over-pressure sintering furnace is used for secondary sintering after ordinary sintering and the drill bit teeth do not fall, long service life guaranteed. They are manufactured with high precision centerless grinding machine, ensuring the dimensions are accurate and standard.

Advantages

1. Made by raw materials, with high wear resistance and durability.

2. Increase the compactness of the carbide inserts through the over-pressure sintering.

3. Superior quality is guaranteed, with a strict quality QC management team.

4. Custom service is provided as the customers’ requirements.

XYMJ will be one of the best choices for professional and trustworthy tungsten carbide mining tool manufacturer, superb product quality, the long service life of mining tools and competitive price guaranteed.

A skid-mounted process system is a construction block within a larger system, a smaller though no less crucial processing segment within the whole.

The three main advantages of skid-mounted systems are:

Mobility

Skids are assembled as modular units, so skid mounted process equipment can be more easily disassembled and reassembled when required.

Protection

The frames of skid-mounted systems provide an added level of security, support, and protection for industrial equipment which often includes complex piping, delicate valves, and other valuable components.

Modularity

Modern production facilities must have the flexibility to change in response to evolving business requirements. This means that modularity, or the ability for process components to be separated, moved about and recombined, is vital as processes are reconfigured.