Sanji technology reasearch and manufacture the smart cabinet, with advanced automatic control technology, superior quality, modest price guaranteed.

Smart Parking Lift

The smart parking lift is a new generation of automated storage equipment. It is a type of vertical lift. It mainly uses the vertical direction space and has a small footprint. It takes the tray as the storage unit through the lifting movement of the extractor, and takes the tray for storing the goods to the operator or to the appropriate cargo in the warehouse. It can make most of the height space and get significant savings in floor space. The automatic transfer of required materials to the operator, greatly save the time of non-productive and search. The safety automatic door is located between the access port and the lifting passage. The automatic door is always closed when the extractor is lifting. With the modular structure design, it can simply increase or decrease the height of the warehouse and make full use of the workshop space.

Smart Parking Lift Features:

1. The vertical lifting container is up to 18m and can fully be used, the height space, saving a large amount of occupied area.

2. It has automatic access and the required material is automatically conveyed to the front of the operator, which largely saves the non-productive running time and search time.

3. It is designed with a module structure. The height module can simply increase or decrease the height of the warehouse, according to the change in the height of the warehouse, which makes full sue of the building space.

4. It is built with a safety door. The safety automatic door is located between the access port and the passageway. The automatic door is always closed when the extractor is running up and down.

Vertical Carousel Storage System

Vertical carousel storage system is a kind of small, automatization, stereoscopic storage equipment. It uses a box as a storage unit, The box will arrive at access port automatically. Mainly used for multi-variety and small-batch inventory management of small and medium-sized materials which can contact the superior management system, to realize the information management of warehouse materials. Vertical storage carousel is an intelligent, fully-closed storage system that has been widely used in aviation, aerospace, military, machinery, electronics, tobacco, wine and other enterprises and institutions. The system is applicable for the storage of standard parts, aviation equipment, electronics components, knives, tools, molds and other materials.

Vertical Carousel Storage System Features:

1. Storing and processing center for information data.

2. Monitor equipment in real-time.

3. Optimize the reasonable unit automatically for products storing.

4. Operation authority protects the material from unauthorized cess and provides greater security.

5. The function of information inquiry.

6. The function of automatic identification and bar code printing.

7. Intelligent and compatible with ERP or MRPII.

Smart Tool Cabinet

Smart tool cabinet is a kind of intelligent item storage management equipment, which combines modern automatic control technology computer information management technology and so on. It consists of toolbox, controllable drawer, automatic control circuit, computer management system, display touch screen and identification system. It can automatically record the tool (material) outbound and inbound information, which greatly simplify the process of manually managing for the storage of tool, improving the degree of automation and realizing the sharing of information. High reliability, meets the strict requirements of tools, widely used in aviation, aerospace, power, communications and other industries. Sanji has a professional team, exclusive management concept, and technical minds, all of which strengthen us as an organization. Our experience as the smart tool cabinet suppliers distinguish us from our competitors.

Smart Tool Cabinet Features:

1. Identification function

2. Tool lending, return automatic registration function

3. Trace management function

4. Tool status, the record query function

5. Automatic alarm function

6. Tool cabinet extension function if one drawer is pulled out it blocks all other drawers. A tilting of the cabinet is prevented.

Smart File Cabinet

The smart filing cabinet is a modern automatic storage device with a chain drive as the storage unit. It has 2 draws made of steel. The box automatically reaches the access port through the rotary motion, which has a small footprint, large storage capacity and access efficiency. It has a high feature and is an ideal solution for small and medium file storage. It adopts PLC control and has various operation modes such as manual control, single machine automatic control and online automatic control. The management monitoring system adopts network structure and can be connected with ERP to realize the standardization and modernization of warehouse management. It is easy to operate. When you input the required materials on the computer, the system will automatically search and send it to the access port. It is widely used in file storage, closed storage, information management with efficient use of space height.

Smart File Cabinet Features:

1. It is a modern automatic storage device with a chain drive as the storage unit.

2. It adopts PLC control and has various operation modes such as manual control, single machine automatic control and online automatic control.

3. When you input the required materials on the computer, the system will automatically search and send it to the access port. It has an optional bar code scanning code, wireless data terminal, etc.

Smart CNC Tool Cabinet

The smart CNC tool cabinet is quick warehousing with scan code positioning, automatic entry. It is fast to use with the paperless operation, large interface, and graphical operation. It supports remote access, online printing and data export. Suppliers can share inventory information remotely and prepare material in a timely manner. The backstage management system can manage multiple devices online at the same time. The security is strictly guaranteed with unattended, identity authority verification, security inventory alert. Advanced production equipment is creating durable products for two decades now. Sanji is growing rapidly for the past few years and has won the trust of the clients. Sanji is considered as one of the best CNC tool cabinet manufacturers by customers all over the world. Smart CNC Tool Cabinet Feature:

1. One-stop service for storage, distribution, recycling, and statistics.

2. No supervision, maintenance-free, low energy consumption, high performance.

3. Efficient access, graphical operation and recycling are more convenient.

4. Scientific design, larger storage capacity and faster speed

5. Product process cost statistics and analysis.

6. Instant inventory information for a key query.

7. Safety stock warning

8. Data interface integration.

9. Automatic reports.

10. Device networking.

For more detailed information, please visit on the sanji-first.com

YSmarines provides high-quality roller fairleads with reliable prices and fast delivery.

ISO13776 Pedestal Roller Fairlead
The pedestal fairlead is manufactured in accordance with the ISO 13776 standard. The actual SWL of the fairlead on board shall be determined by considering the under deck reinforcement and shall not be over the SWL indicated in this International Standard. Depending on the rollers on the top, the fairleads shall be classified as two types including the cylindrical pedestal and conical pedestal. Besides those, other options such as square or customized pedestals according to the requirement of clients are available

ISO13742 Roller Fairlead Without Upper Roller
The roller fairlead is made according to ISO 13742 standard without upper roller and it is a universal fairlead consists of horizontal and vertical universal rollers to increase stiffness and fairlead strength, guiding mooring ropes from all directions, greatly reduce the abrasion of mooring ropes. The fairlead compact structure and reasonable openings are not only for ordinary vessels towing or mooring but also for navigation in the canal waterway ship is towed or moored. The certificate of BV, ABS, LRS, DNV, RS, IRS, etc is available for ISO13742 fairlead

ISO13733 Roller Fairlead with Upper Roller
The roller fairlead is manufactured according to the ISO 13733 standard with an upper roller. It is a type of ship’s mooring fitting installed on board to lead the mooring rope from the ship’s inboard to outboard. The fairlead is also known as universal fairlead because it can lead the mooring ropes from different directions. All surfaces shall be free from any visible flaws or imperfections. It is coated externally with an anti-corrosion protective finish. The rotating parts are provided with greasing. Depending on the construction, the roller fairleads shall be classified as four types as below, which includes type 4R, type 5RL (with additional guide roller on the left side), type 5RR (with additional guide roller on the right side) and type 7R.

Horizontal Guide Deck Sheave
The horizontal sheave is a type of mooring fittings to guide the mooring rope horizontally on the deck. It is also named the horizontal deck sheave fairlead. It is built to withstand breaking strength of indicated rope at 90-degree sheave wrap on the sheave. The warping angle of the sheave can be 90-180 degrees. It is made from cast steel with hardened rope groove for longer life. It is on a weld down the mounting base with an epoxy primer coating.

DIN 81906 Warping Roller Fairlead
The warping roller is made according to the standard of DIN 81906-1999. It must be identified clearly and permanently with the nominal size and manufacture’s symbol. It is made from cast iron or cast steel material and the materials must conform to the DIN standard’s requirement, which increases the durability, good wear and corrosion resistance to ensure a long service time. Its maximum towing load is from 10KN to 320KN. It is used to guide rope or cable.

CB/T 3062 Roller Fairlead
The roller fairlead is made according to the standard CB/T3062-2011 and also is called the roller head fairlead or universal fairlead. It is designed for mounting free on deck, and welding into the bulwark with a rope turn of 90°. The rollers and axles are interchangeable. The surface of the rollers do not have any defects which affect its performance and intensity such as cracks, blisters. The fairleads are designed with 3 rollers, 4 rollers and 5 rollers easily adapted to meet clients’ requirements, which are A-type (3 rollers), B type (4 rollers) and C type (5 rollers).

A40 Swivel Head Anchor Fairlead
The A40 swivel head anchor fairlead is the heavy-duty single sheave fairlead. It is made of high-quality steel. It is fitted with a removable guide roller and hardened rope groove to ensure long-time use. It is suitable for use in most deck-mounted or flange-mounted marine-duty applications, which can be manufactured with welded foundation or bolted foundation. It can be used for guiding ropes in ship mooring and will not break down. The fairlead is designed for breaking strength of wire with 90° wrap on sheave and +/- 90° rotation of swivel head.

A38 Swivel Head Anchor Fairlead
A38 swivel fairlead is one kind of the heavy-duty double sheaves fairlead. And the anchor fairlead can be supplied with a welded and bolted foundation for the installation on the deck of vessels or on the dock. It is one kind of roller fairleads with high breaking strength to suit wire rope for ship mooring. It is designed with 90° wrap on sheave and +/- 90° rotation of swivel head. The shape of the opening is approximately elliptical.

A39 Swivel Head Anchor Fairlead
The swivel head fairlead is the heavy-duty balanced anchor fairlead and is installed on the deck of ships. It is suitable for use in most deck-mounted or flange-mounted marine-duty applications, which can be manufactured with welded foundation or bolted foundation. At the beginning and end of the fairlead, there are the same size front panel and back panel. The surface of the opening is smooth to avoid the abrasion of anchor chains. With the compact structure and reasonable opening, the swivel fairlead is applicable to not only ordinary ship towing or mooring but also to ships sailing in the canal waterway.

For more detailed information, click the Contact YSmarines page

Auxiliary equipment has high working efficiency and guarantees that the rolling mill save rolling time with high output.The structure of the equipment should be advanced and reasonable with flexiblity in movement, easy to operate and maintain.The standardization of spare parts is necessary with easy manufacturing.The production capacity of the auxiliary equipment is generally greater than the rolling mill to ensure product capacity of the rolling mill.The equipment design is economical and reasonable with small in size and light in weight.

Rebar Bar Packing Machine

The advantages of rebar bar packing machine includes fast and efficient, automatic, uniform operation and high safety. Wiith the machine, the packed products include 6.5,8,10,12mm wire, steel bar/pipe/tube, stainless steel tube, aluminum tube,rubber tube, shapes like bar floor board & etc. Double-ring & double-rub wheel devices make working more safe stable & energetic. Special conveying device is easy for loading & conveying the package strengthens the transfer capacity. Wide packing belt can be used for cutting the packing cost & making the work more efficiency. Separate control panel makes operation & maintenance become easy. Material tension could be adjusted automatically.

Wire Take-up Machine

Wire take up machine is used to the winding of copper wire, aluminum wire and steel wire rod. The machine is equipped with a torque motor and its speed is adjustable. It can be used with wire drawing machines, rolling mills and other equipment. Spool take-up machine can make the process coherent. It is easy to operate. According to the closing weight, the rebar take up machine can be divided into 0.5 ton class, one ton class and two ton class.

The vertical steel wire winding machine automatically places the wire on the rotating wire rack. The machine can automatically place the wire and deposit much wire. The amount of the deposited wire is determined according to the height of the wire rack, generally, it is between 500 and 3000 kgs. After the rack is full, the wire is pulled out and removed, then change to an empty rack. This machine can work continuously. The vertical steel wire winding machine has the advantages of high-temperature resistance, high speed, and the same level of the three-level disk screw in large steel plants. It has a neat appearance and is easy to transport. It is the ideal equipment for medium and small wire drawing plants.

Pinch Roller Machine

The pinch roller machine is used to hold the rolled parts and feed them into the laying head. The pinch speed is 0-30m / sec and the products are pinched are Φ5mm–Φ25mm round steel and wire. The machine consists of the operation part and the transmission part which are welded at the whole bottom pallet. The elevation movement of the upper roller is realized by the auxiliary motor through the auxiliary reducer, which drives worm and worm wheel under the left and right roller bearing to move automatically. The machine has full PLC programming control, stable and reliable system, digital panel for easy operation and It can achieve 100% synchronization for up and down roller with large feeding force, fully automatic control.

For more detailed knowledge, please click on the page of TINVO rolling mill articles

Mechanical spring starter can start diesel engines in any special environment releasing the spring’s potential energy. The spring starter requires no battery or any other external system, only by hand. It is the ideal backup starter, especially suitable for firefighting, emergency rescue, military, marine and other environments that require high starting reliability. It is also the best starting solution of “black start” or “dead-ship start”.

I guess everyone will work with an engine in daily life, and the most common engines are car engines and motorcycle engines. As we all know, the engine is the source of power that can bring power to modern society.

While every engine must be started by the starter, the common starter is an electric starter that needs a battery to provide energy. Other starting methods like air starter, require an external system to provide energy. All of them rely on external power; once they lack external power, the engine is “dead”.

Although the electric motor is convenient and even automatic, it still needs maintenance. If the starter is out of maintaining or out of electricity, the engine won’t start. It is fine for common situations, but it will cause bad results if it is an emergency.

But how can we avoid this? It is easy to understand the principle and solve the problem. Let’s focus on the engine of a motorcycle, every motorcycle will be equipped with a kicking starter for start engine. It is an easy and simple way to start an engine if the electronic starter doesn’t work.

We can also provide an alternate startup option for other engines, mechanical spring starter. It is based on different principles comparing with the kicking starter of a motorcycle. It can start a diesel engine in any special environment by releasing the spring’s potential energy. Cqstart spring starter, using a simple mechanical mechanism, stores the energy by compressing the springs and releases the spring’s potential energy by pulling the trip lever to turn the engine’s flywheel. The mechanical spring starter can apply to emergency generator sets, lifeboats, firefighting sets, emergency pump sets, construction machines, power plants, irrigation and drainage device, etc.

If you want to get more info about that, just click here: Chongqing Starting Power Unit Co., Ltd

The type of anchor you use can vary a lot, depending on the size and type of boat, the location of the boat, and the type of bottom material you’ll be anchoring into. Generally, it’s best to have a boat anchor on hand that will be effective in the widest variety of environments you’re likely to be encountering. But it some cases, you may want to have multiple anchors on board that can be used in different circumstances.

In this article, we’ll look at the various types of anchors, and zoom in on which ones are most effective in which environments and use cases.

What is an Anchor?

An anchor is a device attached to boats with a chain or rope to help the vessel stay in place. Almost universally made of metal, anchors vary in their design depending on the type of boat you have and the area you plan to use it in.

Types of Surfaces an Anchor Works With

When selecting an anchor to use, it’s important to consider the surface you plan to secure it in.

Mud

Mud tends to be very thin which can pose a problem if you don’t use the right anchor. A mud anchor usually needs to be tilted to a 32-degree angle in order to fully secure itself to the ground.

Sand

Sand is one of the most common surfaces an anchor needs to work with. Because it’s so soft, it’s easy for anchors to secure themselves into it.

Rocks

Rocks can hold an anchor well, but it’s important to have a sharp anchor that can dig in between them. A plow-shape anchor is best for a rocky surface as it quickly pokes into the rocks.

Grass

Grass is a challenging surface to use an anchor in. This is because the anchor might twist itself into roots rather than into the ground. Because of this, it is important to use an anchor that can cut through roots and grass.

Clay

Some surfaces might be made of clay. Clay is very difficult for some anchors to attach to because it’s so compact. Due to this, there are special anchors designed specifically to be used in clay and feature extremely sharp tines that pierce through the ground.

Coral

Coral is a pretty similar material to anchor into as rock. For the most part, anchors that work well in rock will work well in coral.

Types of Anchors

Danforth Anchor

Also known as a fluke anchor, the Danforth anchor features two flat triangular grooves on the edge of it. This anchor is very lightweight and works well in mud and sand. The two fluke prongs attach quite well in muddy and sandy bottoms — which are by far the most commonly encountered types of ground. The Danforth is easy to work with, and easy to stow, making it a great general purpose anchor.

However, it functions poorly in rocky, grassy, or coral conditions

If you only want to have a single anchor on your boat that will work in a wide variety of circumstances, the Danforth fluke anchor is probably the one you’re looking for.

Stockless Anchor

The stockless anchor was one of the first anchor designs in the world. It’s known for its strong grip and doesn’t tend to be as heavy as other models. A stockless anchor features two flukes curving off its sides and a socket in the middle which helps it to sink. On the bottom of this socket are small palms which help the anchor to secure itself to the ground.

Mushroom Anchor

This type of anchor is designed to be used in sand or very fine surfaces. A mushroom anchor looks like a mushroom as it has a long rod connected to a circular bottom. This circular bottom works as a suction cup which helps the anchor to stay secure wherever it is placed. Eventually, sand can cover the top of the mushroom mooring anchor helping to keep it fastened to the ground even more.

These work great for small boats as a “lunch anchor”. They’re not designed for strong holding, but will keep a small craft in place for a time in calm winds. They’re super convenient, compact, and easy to work with. They’re commonly sold with a vinyl coating.

When you’re not at the dock, you’ll need an anchor to secure your craft. These devices are crucial to have on hand for any boat. They help to keep the vessel secure and prevent it from floating away, and are especially important in hazardous conditions.

Auxiliary equipment to various machinery and equipment other than rolling mill. It consists of mechanical equipment used to complete a series of auxiliary processing procedures. According to the difference usages, auxiliary equipment can be classfied into the flying shear machine, drawing machine, straightening machine, cooling equipment, lifting and transporting equipment, etc. The selection of auxiliary equipment is very important for rolling mill. The equipment should meet the requirements for product production.

Hot Rolling Mill Cooling Bed

The cooling bed is used for the rebar hot rolling mill production line and consists of a mechanical transmission system, a water cooling system, a cold bed work surface, and a fixed bracket. The cooling bed has the advantage of significantly reduce energy consumption and cost and improve the processing performance of metals and alloys. Hot rolling usually uses large ingots, which not only improves the production efficiency, but also improves the rolling speed. The output of the cooling bed is 25ton/hour and final dimension is Φ8-32 deformed steel bars. The Maximum bed load is 40 tons.

Rolling Line Water Cooling System For Steel Bar Production

The water cooling system in steel plant mostly is used in the rolling mill line for steel bar production. Operators can control flow and system cooling by pulsing each spray up to five times per second. Pulsing capability enables operation at lower flow rates without compromising impact, spray angle or drop size. The system will automatically adjust the cooling profiles based on the inputs from the shapemeter. The water cooling system for the rolling mill has modular design allows for simply maintenance when needed. Typically, these self-cleaning valves require no maintenance for at least five years and are constructed of high quality, stainless steel internal components to ensure accurate, long-lasting performance.

Pickling-Free Rust Remover Machine

The pickling-free rust remover machine mainly is used for rust, polishing, lubrication, etc. The acid-free machine simplifies rust cleaning procedure. It can complete the shelling, rust removal, polishing, lubrication and other tools at a time. The the newly wire treated has a longer rust resistance and can be used indoors for more than 6 months. There are various types of pickling and descaling machines, which can handle wires of different diameters: φ2.5mm-4.0mm, Φ5.5mm-8mm, Φ12mm-16mm, Φ16mm-24mm.

For more professional knowledge, please visit on the page of TINVO rolling mill articles

The engine is the source of power, bringing power to modern society. While the engine must be started by a starter. The common starter is an electric starter that needs a battery to provide energy. Other starting methods like air starter, require an external system to provide energy. All of them rely on external power. Once it lacks external power, the engine is “dead”.

The mechanical starter is the ideal solution during the above situations. Cqstart spring starter, using a simple mechanical mechanism, stores the energy by compressing the springs and releases the spring’s potential energy by pulling the trip lever to turn the engine’s flywheel.

What is the mechanical spring starter?

A mechanical starter which stores the manpower energy by compressing the disc springs and releases the energy by pulling the trip lever. And then the drive pinion will drive the flywheel to rotate.

It is the ideal solution for a black start, mostly used in military, emergency rescue, firefighting, marine and some other conditions where require high reliability. It is also called mechanical spring starter, spring startup, hand starter, hand-operated spring starter.

How to fit a mechanical starter to the engine?

(1)Most of the flywheel housings have two bores. The electric starter has taken a bore. And spring starter can be installed to the other bore.

(2) If the engine only has one mounting bore, just remove the electric starter and install spring starter to the mounting bore when needed.

Advantages of mechanical spring starter.

Compared to an electric starter, the mechanical spring starter is maintenance-free. And compared to other means of starting, spring starter requires no external system such as battery, cable, air compressor, fuel tank and so on. Cqstart spring starter is waterproof, anti-corrosion, and produces no sparks. With natural anti-explosion structure, you can use it anywhere dangerous.

Marine roller fairlead, also called guide roller, is installed on the round-shaped base of ship deck between the fairlead and winch. It is used to change the direction of mooring ropes and helps lead the ropes to the reel. YSmarines supplies a variety of sizes and types of the roller fairleads including swivel head fairlead, DIN81906 warping roller, JIS F 2014 warping roller, vertical guide sheave, NS2585 warping roller and so on. YSmarines also can offer the customized fairleads according to customer’s special requirements.

NS2585 Warping Roller Fairlead
NS2585 warping roller is the same as the GB/T 10105-88 fairlead. It is cast by the finest quality marine mild carbon steel for added durability. All surfaces in contact with the ropes shall be free from surface roughness or irregularities likely to cause damage to the ropes by abrasion. It has a high breaking load of a tightwire. The compact design, precision machined smooth surface and easily removable shafts ensure the good wear and corrosion resistance of the fairlead. It is used to lead the direction of mooring ropes for marine ships.

ISO13767 Shipside Roller Fairlead
The shipside roller is made in accordance with the standard of ISO 13767. The safe working load (SWL) intended for the use of the roller fairlead shall be noted in the towing and mooring plan available onboard for the guidance of the shipmaster as specified in MSC/Circ.1175. There are two types of fairleads as the construction, which include 2-roller type and 3-roller type.

Vertical Guide Sheave
The vertical sheave is a type of mooring fittings to guide the mooring rope vertically on the deck. The fairlead is built to withstand breaking strength of indicated rope at 90-degree sheave wrap on sheaves. It is made of cast steel with hardened rope groove for longer life. There can be one sheave or two sheaves together. It is a removable guide roller with an epoxy primer coating. It is a special sheave for high-performance synthetic ropes.

JIS F 2026 Roller Fairlead
The roller fairlead is manufactured strictly according to the Japanese Standard JIS F 2026-1980. It is also known as universal fairlead with horizontal rollers and vertical rollers. It is made of stainless steel. Its surface is polished and galvanized which has high corrosion-resistance. It is usually located on the deck end or in the bulwark. It can perfectly guide the direction of ropes and protect them. There are three types for the fairleads: Type A (4 rollers), Type BR (5 rollers) and Type BL (5 rollers and symmetrical to BR type).

JIS F 2014 Warping Roller
The warping roller is manufactured according to the JIS F 2014 -1987 standard. It is also known as CB58-83 fairlead. It is used as a shipside roller fairlead and is to change the direction of the ropes. All surfaces of the fairlead, including welding, shall be free from any visible flaws or imperfections. The roller diameter is from100mm to 450mm, suitable for rope diameter from 40mm to 80mm. The warping roller has three types including type A (one roller), type B (two rollers as a group) and type C (3 rollers as a group).

For more professional detailed information, please visit the product page of marine roller fairlead

The straightening machine belongs to straightening equipment and is one of the steel processing machinery. It is applicable to straighten and cut steel bars with a diameter of less than 14 mm with customized cut length according to the different requirements of the clients, widely used for cold-rolled ribbed steel bars or hot rolled wire rods with high-speed straightening. The types of straightening machine include rebar wire rod straightening machine, pipe and round bar straightening machine, scrap rebar straightening machine, CNC straightening and cutting machine. The machine can adjustable straightly cut stainless steel wire, aluminum wire, cold-drawn wire, plastic-coated steel wire, tubes, round bar steel, etc with uniform incision, smallest error, and high performance.TINVO provides superior quality wire straightening machine in china, the most competitive price guaranteed.

Rebar Wire Rod Straightening Machine
The straightening machine is a multi-wheel rebar straightening machine with a V-shaped groove, 22pcs vertical straightening wheels and 7pcs horizontal straightening wheels. The vertical alignment wheel is actively aligned, the transmission mode is gear transmission, and the horizontal alignment is passive. The straightening wheel is made of 9Cr2Mo. The incoming line is manually threaded. The wire speed of the machine is adjustable and the maximum speed is 150 meters/minute. Straightening, shearing and other parts are stable, safe and reliable. The entire rebar steel straightening and cutting machine includes a straightening section, a shearing device, a silo, and an automatic console. The straightening machine is equipped with a 5.5KW servo motor and a cycloidal pin reducer to drive the fly shearing work. The motor control method is a servo controller, so the cutoff machine acts with high speed and low loss.

CNC Straightening and Cutting Machine
Compared with other manufacturers’ similar products, the straightening frame of GT4-14 adopts the hot rolling process, which has the features of beautiful appearance, strong rigidity, good straightening effect. The hydraulic system is simple, reliable, with no oil leakage and more accurate. It has the microcomputer control, automatic straightening, automatic length, cut off automatically. The nosier become lower and can save electricity. The CNC wire straightening machine has smooth operation with low fault rate and It’s easy for maintenance.

Scrap Rebar Straightening Machine
The scrap rebar straightening machine not only has the function of straightening steel but also can remove the thread of waste rebar bar. The machine is to change the shape of the steel bar into a straight strip that can be reused, by means of passing the old rebar and the waste round steel through several straightening rolls. It is characterized by advanced design with safe, reliable and easy operation as well as stable performance. It is able to straighten scraped rebar with high efficiency. Cutting function has been added to remove unwanted part. The four heavy-duty wheels can be used to move the machine anywhere easily. It reduces the cost of the materials and protects the environment by re-using the scraped rebar.

Pipe and Round Bar Straightening Machine
The pipe straightening machine can be used to straighten tubes and round bar steel. It is possible to straighten pipes and rods of Φ6-Φ30mm, with different types of straighteners, for different specifications. It is applicable for straightening bending deformation pipe, cleaning the surface of the steel pipe ash and steel pipe paint. The machine has easy and compact structure for convenient and high efficiency operation. It is a multi-functional integration which can complete multiple operations of straightening, derusting and coating the steel tube at one time and has no damage to the steel tube. It can save time, labor and environmental protection.

The Basic Composition Of Spring Starter

The spring starter assembly consists of four major parts: a disk drive mechanism, an energy storage mechanism, a release mechanism and a clutch mechanism. The figure below shows the basic structure of a typical disc spring energy storage motor.

The Main Work Process Of Spring Starter

The energy storage mechanism is the main mechanism of Cqstart spring starter, the main parts are disc springs and main shafts. Together with the components, they cooperate with, the following functions are realized. First, they can convert the aforementioned manpower input torque into an axial force. This force is compressed and turns into energy which is stored in the disc spring group. Secondly, they can convert the spring potential energy which is stored through compressing spring into torque output through the main shaft to form the power that drives the rotation of the diesel engine.

Detailed Operating Structure Of Spring Starter

The Releasing Mechanism

The release mechanism is a part of the operating mechanism for spring starter, its main parts are the lifting rod assembly and the releasing lever working chain. The operator performs two operations with the lifting lever and the releasing lever. The purpose of operating the lifter is to keep the releasing mechanism in a state of being ready for energy storage, in which state the rotation of the spindle will be limited in order to achieve energy storage of the spring. The purpose of operating the releasing lever is to cancel the limitation of the spindle rotation when the diesel engine needs to be started; and at the same time completing the discharge of the disc spring, the output torque of the spindle, and the starting process of the diesel engine. In that progress, the shaft drives the flywheel drive gear to rotate.

The Clutch Mechanism

The clutch mechanism is a mechanism that combines and disengages the movement of the spring starter and the engine. The main part is the flywheel drive gear, which generates axial movement by means of a spiral groove on the starter main shaft. When the diesel engine needs to be started, the main shaft rotating pushes it to move in the direction of the flywheel to achieve meshing with the flywheel ring gear. Conversely, when the starter is working and the diesel engine begins to rotate actively, the flywheel of the diesel engine drives the rotation of the flywheel for driving gear while moving it backward along the axis, disengaging engagement of the gears.

disc drive mechanism

The disc drive mechanism is a manpower input mechanism, and the main parts are the disc drive shaft and the transmission gear. It is the only way to convert manpower into spring energy. One of its functions is to determine the disk movement space and the angle required for the disk to make the operation convenient and comfortable. Secondly, it changes the direction of the input torque so that the axis of rotation conforms to the axis direction of the disk spring energy storage. Third, it can limit the reversal of the disc axis. And last, it is the radial support of the spindle and the axial thrust.

Easy Way to Start a Diesel Engine

Cqstart spring starter is easy to operate when there is short of electricity, which compares with other ways. When the diesel engine needs to be started, first needs to ensure that the diesel fuel supply system of the diesel engine works normally. Then pulling the lifting rod of the starter to make the releasing mechanism in the preparation state of energy storage, and using the rotating handle to rotate the starter disk in the specified direction for reaching the required energy storage state. And then, pushing the releasing lever in the direction indicated. After that, the diesel engine will be started.

For more professional knowledge, please visit the page of Cqstart spring starter article