Yuneng’s Vacuum Lubricating Oil Recycling Machine is mounted with online particle counter and moisture tester, you can check the cleanness grade NAS during the operation, and the moisture tester will show and detect the moisture content timely in the oil, the unit of the tester can be PPM or ISO standard, which is very convenient and practical.
With triple-stage filters, oil-water separator, mainly used for turbine oil processing, can quickly and efficiently remove oil in the water, gas, impurities. So that the oil quality indicators meet the new oil standards to ensure that the unit regulation, lubrication system to work properly, to extend the maintenance cycle unit. Using the advanced international principles of strengthening the hydrophilic and hydrophobic, dehydration, precision filter in one, online demulsification, dehydration, acid removal, impurity removal, the turbidity of the turbidity emulsified turbine oil becomes crystal clear. It is suitable for the deep dewatering of transparent oil, hydraulic oil, refrigerating machine oil and other lubricants that need to remove a lot of water and finely filter the impurities
Features of the Lubricating Oil Recycling Machine
With the strong ability to filter the impurity, which can filter the particles completely.
With online particle counter and moisture tester together.
Advanced dielectric condensation device
This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the water–separator device. So it is easy to control this machine.
We adopt the high-quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities.
The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology.
Sanji-first, as a professional mobile workbench supplier, offers workbench with high-grade material, the most affordable price guaranteed. The workbench is widely used in laboratories, maintenance plants, electronic moulding, assembly lines, mould factories, machinery factories, etc.
Narrow Workbench With Wooden Table
Features
1. The table is suitable for placing some heavy objects such as iron drums with a hollow tool cabinet for storing relatively large materials.
2. Easy assembly with pre-drilled holes and included hardware.
3. Polyurethane-coated work surface for enhanced durability.
4. Steel frame in a tough graphite finish.
5. Ideal for use in garages, warehouses, basements or workshops
Mobile Workbench With Pegboard
Features
1. The stacked ball slides on both sides of the drawer provide excellent smoothness and improved service life. The extended stretch distance allows the drawer to be fully opened for easy extraction of objects inside the drawer.
2. Double-layer steel plate with mesh plate makes the body stronger and durable and the mesh plate is used to suspend tools or accessories to extend the use of functions.
3. The central lock uses a ring-shaped key structure to extend the life of the lock. In order to avoid opening the drawer after losing the key, each lock is assigned a corresponding number and the key can be reconfigured as long as the number is provided.
4. The four corners of the mobile workbench are equipped with anti-collision strips made of new composite materials, which can effectively buffer the damage caused by accidental collision during use.
5. It has 4 heavy-duty wheels with 125mm diameter for easier to cross obstacles, 2 universal wheels and 2 directional wheels for easy steering and movement.
6. Countertop has special small grooves for holding liquids such as butter for easy use.
Mobile Workbench With Electrical Rubber Board
Features
1. The workbench top adopts non-slip mats to effectively prevent the tools from slipping during the movement of the cart.
2. Two large space on the small surface to ensure that large and small objects can be stored.
3. Freely adjustable partitions in the drawer allow separating storage space freely.
4. Full-width aluminum alloy drawer handle with an interchangeable label, beautiful, convenient and practical.
5. Advanced drawer safety buckle design ensures that the drawer will not accidentally slide out after closing.
6. The best mobile workbench provides flexibly adaptable with perforated side and rear panels for holding accessories and tool hooks.
7. The robust, ergonomic push handle is extremely user-friendly.
Mobile Workbench With Hanging Board
Features
1. The frame prevents the tool from slipping with rubber to protect the paint.
2. Big labels, safety lock, slots can be used with spacers, adjusting the space inside the drawer freely.
3. The back panel is designed with precise square holes.
4. Precision control safety lock, sturdy and durable, low failure rate.
5. The hanging board is easy to hook for placing various types of tools
Mobile Workbench With Storage
Features
1. The hanging plate type can choose between louver hanging board and square hole hanging plate.
2. Took hook and cabinet can be customized to meet the requirements of the clients.
3. The mobile workbench with storage has a robust design. Keyhole hooks are made from steel and storage containers adopt durable polyethylene (PE) material.
4. Fast and easy assembly with simply hooking onto any perforated rear panel or placing in containers.
5. Great design diversity provides wide selections of keyhole hooks for efficient tool storage. A wide variety of colors and sizes can be available for storage containers.
Turbine Oil Application and Purification Turbine oil is lubrication and cooling material commonly used in turbine assemblies, turbine compressors, steam and gas turbines. The oil can be of mineral or synthetic origin. The main quality parameters of turbine oil are: Viscosity corresponding to operation temperature; Resistance to oxidation; Demulsifying and water resistance; Long service life; Resistance to foam formation. During long term operation, the metal parts and components of turbine equipment are influenced by air, water and high temperature. Oxidized turbine oil gradually changes color from red to black and develops an unpleasant odor. Sludge forms in the oil, acidity grows, along with corrosion, foaming and formation of emulsions. The lubricant becomes unusable.
The turbine oil purifieradopts the latest technology, which integrates gravity, sedimentation, reunion, vacuum separation, adsorption, separation and pressure filtration into one. With super strong demulsification, dehydration, deaeration, and impurity removal capabilities. Used turbine oil can be purified using special equipment. Yuneng manufactures the DYJC turbine oil purifier for heating and filtration of turbine oil. DYJC is equipped with oil input and output pump, a vacuum chamber, a vacuum pump, coarse and fine filters and a control cabinet. The unit is installed in a container on a trailer. It is compact and mobile; the unit can be towed to the turbine by automobile. The turbine oil purifier in the Yuneng unit is performed with vacuum treatment for higher degree of purification. Beside particulate matter, the process removes solved water and gases from the oil. The equipment operates at the rate of 4 m³/hour with materials with viscosity below 280 cSt at 50 ℃.
Lube oil does not wear out! However, its lubricating quality tends to deteriorate over time due to contaminants such as dirt, sludge, metals, and water to name just a few. There are many different ways to remove these contaminants, some being more effective than others. Common methods include: strainers, filtration, settling tanks, and centrifugal type purifiers.
In the centrifugal purification process, there are two common methods used. One method is the batch purification process where all of the oil is removed from a storage tank (sump, settler, etc.) by the purifier and is delivered cleaned to another reservoir. This method is typically done on machinery that is not operating. The other method is the continuous process where the centrifuge takes a portion of the oil from a tank, cleans it, and recycles it back to the same tank. This method can be used on operating equipment but is not as fast or efficient as the batch process.
Aboard ZJC Lubrication Oil Purifier, we have a disk-type, non-self-cleaning purifier manufactured by Yuneng, and used as a separator in the continuous process.
Centrifuges can also be used as Separators or Clarifiers. Separators use a dam ring or discharge ring and remove water as well as solids from the oil is purified. The water is discharged from the purifier. A clarifier is used when the main contaminant is sediments, and water does not need to be removed from a system. Any small amounts of water that does enter the centrifuge will remain in the bowl until it is cleaned.
Centrifugal lube oil purifiers as sometimes categorized as disk-type or bowl-type purifiers according to the shape and general arrangement of the centrifuge and some purifiers are self-cleaning, while others must be manually cleaned.
In a disk-type purifier, a bowl-shaped rotating element encases a stack of disks. The bowl itself sits atop the vertical bowl spindle which is driven by a worm gear and clutch assembly. The spindle and bearing absorb the weight of the bowl assembly. Once operating, the bowl spins at approximately 7500 rpm. As liquids and sediments of different densities enter through the distributor (the innermost center of the bowl housing) of the centrifuge, they are quickly separated by the tremendous centrifugal force created by the velocity of the centrifuge, and also by the close separation created by the shallow distances of the individual disks inside the bowl housing. The clean oil travels up between the neck of the top disc and the tubular shaft/distributor. If the centrifuge is operating as a separator, the water will discharge out between the neck of the top disc and the discharge ring mounted at the uppermost section of the bowl top. Sediment, sludge and other materials will be moved to the inside of the bowl shell and will remain there till clean. It is important to note that the size of the discharge ring must be properly matched for the density of the lubricating oil to be purified. If you are to use the purifier to centrifuge other oils with different specific gravities, a different discharge ring must be used for each.
Dry air generator for the transformer is mainly used to quickly and effectively provide dry air for transformers and other industrial equipment. It uses an air compression system, refrigerated air drying system, adsorption drying system, air purification system and PLC control system. is mainly used to quickly and effectively provide dry air for transformers and other industrial equipment. It uses an air compression system, refrigerated air drying system, adsorption drying system, air purification system and PLC control system. This air drying equipment and purification system use a low-pressure oil-free compression system and low-temperature condensed moisture removal technology, which can solve the problems of dirty oil caused by air, steam and dust. Yuneng’s dry air machine has the characteristics of small size, lightweight, easy installation and operation, energy-saving and high reliability. This machine has a series of instant display instruments such as power supply voltage, outlet pressure, outlet dew point, outlet temperature, absorption stroke, etc., which is very convenient to manage.
The SF6 filling device can withstand pressures up to 5.0mPa, and the SF6 gas can be recovered to a final vacuum of 1 mbar to 5 mbar, which far exceeds the IEC 62271-4 regulations. This type of equipment is equipped with semi-automatic controls and is easy to operate. especially designed and prepared for SF6 gas. Our unit includes initial recovery, purification, evacuation, and refilling and transfer of residual gas to an empty cylinder. Main features are 100 % oil-less compression, SF6 gas recovery up to desired vacuum level (-1 bar), Inline filtration and purification.
Advantages: Complete functions, rational construction and easy operation Regeneration system adopts bipolar single-acting compressor with foreign compression technique which can compress SF6 to liquid and store it into storage tank directly. The vacuum evacuation system adopts a domestic or imported twin-stage rotary-van vacuum pump with a fast vacuum rate and also equipped with oil back-flow prevention device for the vacuum pump. The recycling pressurization system adopts a vacuum recycler with low recycling residual pressure and fast speed. The filter is equipped with build-in vacuum electrical heating and built-in high efficient absorption agent to make the filtration performance much better ( no need change agent frequently) Control system adopts SF6 gas special valve. The storage system can be customized with various capacity as per users’ requests. All control functions are concentrated on the front of the machine with a clear interface and convenient operation.
High Vacuum transformer oil purification The increasing voltage and rating of the modern transformer and electrical apparatus result in greater electrical stress in insulating material and fluids. To handle these greater stresses, transformer oils with better dielectric quality are required, and lower residual water content in insulation must be maintained.
The proper treatment and upgrading of the insulating fluid/transformer oil will result in the improvement of the properties of the entire insulating media of power transformers.
The principal functions of the insulating liquid are to serve as a dielectric material and an effective coolant. To perform these functions, the insulating liquid must have the necessary qualities at the time of initial impregnation and filling at the factory and later maintain the same quality in the field operation.
The Double Stage High Vacuum Process upgrades the new or used electrical insulating liquids and transformer oil.
A High Vacuum Transformer Oil Purification Machine is used for dehydrating and degasification of electrical insulating fluids (transformer oil) to increase and maintain their dielectric strength. The processing includes the removal of free and soluble water, free and dissolved air and gases, and particulate matter.
Please inquire and let us help select the features that best meet your requirements. We offer rugged designs and options to meet nearly any application. chinaoilpurifier.com
YSmarines is a professional roller fairlead supplier with excellent quality, the most reliable price and fast delivery guaranteed.
Features
1.Flexible bearing or axle.
2.Smooth surface coated externally with an anti-corrosion protective finish;
3.Anti-seawater material.
4.Customized weldable Pedestal
5.Seawater resistant bronze slide bearing with grease lubrication.
6.Welded structure
NS2585 Warping Roller Fairlead
NS2585 warping roller is the same as the GB/T 10105-88 fairlead. It is cast by the finest quality marine mild carbon steel for added durability. All surfaces in contact with the ropes shall be free from surface roughness or irregularities likely to cause damage to the ropes by abrasion. It has a high breaking load of a tightwire. The compact design, precision machined smooth surface and easily removable shafts ensure the good wear and corrosion resistance of the fairlead. It is used to lead the direction of mooring ropes for marine ships
ISO13767 Shipside Roller Fairlead
The shipside roller is made in accordance with the standard of ISO 13767. The safe working load (SWL) intended for the use of the roller fairlead shall be noted in the towing and mooring plan available onboard for the guidance of the shipmaster as specified in MSC/Circ.1175. There are two types of fairleads as the construction, which include 2-roller type and 3-roller type.
ISO13755 Warping Roller Fairlead
The foundation of the warping roller shall be determined by the manufacturer in accordance with the standard of ISO13755. The roller is made from steel casting having a yield point of not less than 205N/mm2 or steel plates having a yield point of not less than 235 N/mm2 and the Axl is made from weldable steel casting having a yield point of not less than 350N/mm2 or equivalent.
Vertical Guide Sheave
The vertical sheave is a type of mooring fittings to guide the mooring rope vertically on the deck. The fairlead is built to withstand breaking strength of indicated rope at 90-degree sheave wrap on sheaves. It is made of cast steel with hardened rope groove for longer life. There can be one sheave or two sheaves together. It is a removable guide roller with an epoxy primer coating. It is a special sheave for high-performance synthetic ropes.
JIS F 2026 Roller Fairlead
The roller fairlead is manufactured strictly according to the Japanese Standard JIS F 2026-1980. It is also known as universal fairlead with horizontal rollers and vertical rollers. It is made of stainless steel. Its surface is polished and galvanized which has high corrosion-resistance. It is usually located on the deck end or in the bulwark. It can perfectly guide the direction of ropes and protect them.
JIS F 2014 Warping Roller Fairlead
The warping roller is manufactured according to the JIS F 2014 -1987 standard. It is also known as CB58-83 fairlead. It is used as a shipside roller fairlead and is to change the direction of the ropes. All surfaces of the fairlead, including welding, shall be free from any visible flaws or imperfections. The roller diameter is from100mm to 450mm, suitable for rope diameter from 40mm to 80mm.
ISO13776 Pedestal Roller Fairlead
The pedestal fairlead is manufactured in accordance with the ISO 13776 standard. The actual SWL of the fairlead on board shall be determined by considering the under deck reinforcement and shall not be over the SWL indicated in this International Standard. Depending on the rollers on the top, the fairleads shall be classified as two types including the cylindrical pedestal and conical pedestal. Besides those, other options such as square or customized pedestals according to the requirement of clients are available.
Sanji-first is one of the most professional workbench manufacturers in China, providing premium quality products, meeting different requirements. The workbencgh can be designed according to the needs of the customers to effectively improve work efficiency.
Professional Workbench With Large Capacity
Features:
1. Large-capacity fitter workbench with double-opening tool cabinet for storing large items and materials, and a tool cabinet with three drawers.
2. Fully extendable drawers offer easy access to tools and equipment.
3. The industrial workbench has a large storage capacity for various tools and materials.
4. It has an internal locking system for protecting your equipment.
5. Premium drawer liners included.
6. It can be equipped with rubber castors for mobile use in a variety of workplaces.
7. with Key Lock locking system for the simultaneous protection of all drawers and doors against unauthorized access
8. Space-saving and well-organized storage in variable substructures with smooth-running drawers with up to 70 kg supported to load and a wide range of partition material.
None-drawer Workbench
Features:
1. Ordinary workbench, a table with no drawer but strong load-bearing capacity.
2. There’s not any drawer installed on the commercial workbench.
3. It is easy to assemble and high in strength, allowing the work table to withstand the rated weight.
4. A wide variety of workbench desktop options can be available to meet different usage requirements.
5. It provides the versatility to hold the essentials for various applications like gardening, painting, and heavy-duty industry.
6. After installing the tool cabinet, it is more reasonable to use the space and store tools and spare parts.
Power Tool Workbench With Cabinet And light
Features:
1. The power tool workbench can be configured with tool cabinets, louver hanging plate and square hanging hole. With a light, it allows the colleagues to work at night.
2. Various types of tools can be hung on the hanging board conveniently.
3. It features fast and easy assembly by simply hooking onto any perforated rear panel.
4. It is made of a solid steel frame with high-quality material and strict quality control is used in the manufacturing process to ensure that each workbench is sturdy and stable.
5. A wide selection of keyhole hooks for the efficient and orderly storage of tools, storage containers in a variety of colors and sizes
6. The no-cross bar differential pull-outs ensure perfect quietness and allow the full extension.
None-drawer Workbench with a Layer Partition
Features:
1. According to the bearing requirements, customers can choose different shapes of table legs.
2. The superior quality workbench top provides a large space to handle your toughest projects and is able to the heavy tools.
3.Back and end guards keep small parts from rolling away or getting lost.
4.The none-drawer workbench come with clear and concise instructions and is easy to assemble.
Long Workbench With Fire-proof Board
Features:
1. The cabinet adopts three-piece lap joint design, which is made of high-quality cold-rolled steel plate by advanced CNC equipment, such as shearing, punching, folding and welding, and is surface-treated by advanced automatic electrostatic spraying process, which is beautiful, sturdy and durable.
2. The impact and the abrasion-resistant surface provides good protection against dirt, liquids and mechanical load.
3. The draws offer extra storage for smaller items.
4. The industrial workbench features heavy duty steel construction and durable enamel finish.
5. It is perfect for storing tools and getting work done around the house or in the workshop.
6. Safety catch to prevent the drawers from falling out and anti-tilt mechanism to prevent the opening of more than one drawer at a time.
Anti-static Mechanic Workbench
Features:
1. The anti-static workbench is simple and generous with beautiful and convenient usage.
2. The table frame is made of high-quality thick steel pipe, which is beautiful and greatly increases the workbench load capacity
3. Two empty single-door cabinets are arranged under the workbench to store large pieces of material.
4. The draw has a central locking system with an interlocking device.
5. Simple assembly makes the workbench is ideal for commercial, home, garage, laboratory or office use.
As we all know that the electric starter sometimes needs maintaining. Spring starter is designed to replace it when it is out of battery or failure. Unlike air starter or hydraulic starter, spring starter requires no external power systems. They are maintenance free, compact, dependable and water-proof, the preferred choice for back-up starting.
Spring starter is a special starting system, which stores the energy of manpower in disc springs and releases it once to start a larger engine. It is widely used in marine emergency gen-set, lifeboat, military power station, fieldwork, emergency generator vehicle, diesel powered fire pump, emergency rescue, agriculture equipment, mine, chemical plant and explosion-proof generator set.
Because one engine model may have different ring gear and flywheel housing. And the installation place for spring starter may vary. Besides, the power of spring starter depends on various engine load. One spring starter is customized for one model of an engine series. It may be not suitable for another engine model.
Cqstart spring stater can be applied for the engine which the displacement is between 0.5L-38L, single spring starter: up to 19L(L6) and 30L(V16), spring starter group system: up to 26L(L6) and 38L(12), our target is to start V16 engine with the displacement of 50L.
Cqstart has the world’s first unique simulated condition test bench. Each starter will go through pre-grinding test, fully inspecting all indexes and the accuracy of assembly. And each product has its own starting performance test record.
Now Cqstart spring stater has been applied in a wide variety of famous engine brands, such as Cummins, Caterpillar, John Deere, Perkins, Volvo, Deutz, Scania, Weichai, Yuchai, Huachai, Hechai, Changchai, etc.
China manufacturers 