Sanji-first is a professional industrial trolley manufacturer and the products have options for almost every business use, superb quality and best prices guaranteed.
Non-slip Industrial Platform Trolley
Features
1. Strong load-carrying capacity, durable and pressure-resistant
2. Low noise and quieter operation.
3. Non-slip industrial platform trolley has a cold-rolled plate anti-slip pattern steel plate with uniform thickness, stable under pressure and heat resistance, wear-resistant. Surface unevenness helps to prevent slipping and is much safer.
2. It adopts iron filings, garbage in the machining industry to load, transport, and pour.
3. The industrial storage trolley has careful design calculations in terms of load and proportion, which makes the heavy and no-load of this iron turning machine is forced to rotate almost at the time of turning. The bearing seat is installed to ensure the flexibility of turning.
4. It is designed with ergonomic principles, the set of force for turning the car body is the same under no load and full load, and the operation is easy and labour-saving.
5. With the self-locking device, transportation is installed with high safety, the car body is flipped through the rotating shaft, flipping flexibility.
6. The industrial trolley is Installed with heavy cream wear-resistant casters, which ensures load and long service life.
Spring starter is a mechanical starter that use energy stored in a high-tech spring pack which is manually wound up and charged for instant release when required to start an engine. A Spring Starter is equivalent to a 5 hp electric starter. It is the equipment for disaster relief, military and strategic use needs to be lightweight and ready for use at a moment’s notice – features which often only a spring starter can provide.
The need for batteries, alternators, regulators and wiring is eliminated as the spring starter does not require electricity, compressed air or hydraulic pressure to operate. In the event that electrical power is required, a conversion kit is available to add to an existing alternator or a self exciting alternator can be used.
Under what circumstances the spring starter is used
On irrigation pumps and boats the combination of water and electrics is a sure recipe for disaster.
On construction sites batteries frequently ‘disappear’ from equipment or fail because of chronic vibration.
In a mine or grain mill, dust can get into switches or be ignited by sparks.
On a lifeboat or oil rig you need a dependable back-up starter that is safe to use and needs only limited manpower when all else fails.
Unaffected by long shutdowns, damp or cold, Spring Starters are ideal for equipment left in storage for long periods of time; from emergency and utility stand-by to grass-cutting and maintenance equipment.
In the remotest of locations sure starting is equally about ease of operation and sustainability in the most adverse conditions.
Cqstart is the undisputed leader in mechanical starter motors for diesel engines. Cqstart spring starter is used around the world under the most diverse conditions and in an increasing variety of applications.
The newest spring starter of cqstart is very simple and affordable, making hand starting the smart option on a wider range of machinery. Fitting is easy. Just remove the electric starter and its connectors and bolt on the spring starter. Perfect as an emergency back up in a boat’s locker, in case of trouble with the battery, starter, alternator or wiring. And excellent as the primary starter for a whole host of uses where you never want to be faced with a dead engine again.
YSmarines is one of the most professional marine passenger seat manufacturers in China. The passenger chairs are widely used for passenger ships and yacht, according to IMO standard and ISO standard with the professional certificates of CCS, ABS, DNV, GL, LR, etc.
Basic configuration
Seat cushion and the back of a chair(including magazine bag), with united and decorative head, armrest, chair foot, an adornment to install rails, railhead, rail decoration layering, life-saving pocket, installation accessories
Optional configuration
Angle adjustable backrest, seat number scarf, life jacket bag, seat belt, color optional, front table tray, back table tray, meal trays, headrest, antimacassar, etc.
Material:
A. Chair surface is leather or fabric flame retardant;
B. Back for high-density polyester one-time forming high cold foam spring backfire sponge;
C. For high-density polyester one-time forming high cold foam cushion spring backfire sponge;
D.Seat beams, chair foot, armrest for high strength aluminum alloy 6063 oxides;
E.Rail for high strength aluminum alloy 6061 oxides;
F.Adornment to beams and railhead for PVC plastic resin materials;
G.Rail decoration layering for environmental protection rubber material;
YS009 Type Passenger Seat
The ferry seats are designed for passenger seating and have the seats with 2-seater or 3-seater. They can be suitable for a fast ferry, the sightseeing boat, traffic boat, pilot launch, etc. They meet modern design according to the features of the boat. It can also be made of various materials, such as fabric, leather and so on. The lifejackets are under the seat base. The armrests are aluminum. The lifejacket compartment and document pocket are optional according to the requirements of customers.
YS004 Type Passenger Seat
The marine chairs are applied for passenger seating. They adopt fire-proof leather, PU/PVC leather, or fabric according to customer’s requirements. This chair has a thick and adjustable back. The anti-corrosion aluminum structure is durable. It can be made in various seating configurations such as single-seat, double seat, triple seat. It can be used for fast ferries, passenger vessels, crew boat, catamaran and yachts hovercraft.
YS002 Type Passenger Seat
The ferry passenger seats have a life jacket storage box under the chair seat. Their surface is made from waterproof material. They adopt electrostatic spray technology after antirust treatment and sealing has been done on the surface of the seat frame. Back cushion with high resilience and the flame-retardant sponge is made by adopting a low-temperature foam molding technique. They all have beautiful appearance and special design which makes people more comfortable when seating.
YS017 Type Passenger Seat
The boat chairs are made of wood and used for passenger seating. They can be widely applied for various passenger ships, sightseeing boat and other passenger vessels. They all have beautiful appearance and special design which makes people more comfortable when seating.
YS016 Type Passenger Seat
The boat deck chairs for passenger seating is a casual seat with stylish design. They are ideally suitable for marine sightseeing and entertainment cruises. It is waterproof and durable. The material of seating adopts fire-proof leather, PU/PVC leather, or fabric according to customer’s requirements. They are sturdy and resistant to the harsh marine environment. They are all made out of anodized aluminum for a high level of stability. They are the chairs that offer a high level of comfort while giving you the support you need.
YS015 Type Passenger Seat
The stainless steel boat seats for passenger sitting, especially are designed for the deck or outdoors of the high-speed passenger ship, cruise ship, traffic boat, yacht, and other passenger boats. They have pleasant seating comfort in combination with a modern design. Seat and backrest upholstered in fabric, vinyl, or real leather. There is a great variety of colors for customers to choose from.
Sanji technology is one of the leading rolling tool cabinet suppliers. The mobile tool cabinet provided by Sanji technology, superior in functionality, will help you make any job easier and faster, and it will deliver great quality at an affordable cost.
2. The drawer adopts special guide rails to take up the weight, with precision ball-bearing and dual rounded rim in the pivot bearing easy maneuverability, even with high dynamic load.
3. The drawer is equipped with a limit device that can be pulled out completely without falling off.
4. All corners are protected by rubber edge protection.
5. Safety catch to prevent the drawers from falling out and anti-tilt mechanism to prevent the opening of more than one drawer at a time.
6. With electrophoretic dip painting and environmentally-friendly powder coating, it has full corrosion protection.
7. The protective ring prevents dirt and threads from getting in.
8. 4 swivel castors with double stop function: fixed castor prevents inadvertent rolling of the trolley, fixed swivel bearing prevents the castors from swiveling.
Rolling Tool Cabinet with Record Board
Features
1. Ball-bearing slides with a weight capacity of up to 140KG/drawer.
2. The cabinet adopts a three-piece lap joint design, which is made of high-quality cold-rolled steel plate by advanced CNC equipment, such as shearing, punching, folding and welding, and is surface-treated by advanced automatic electrostatic spraying process, which is beautiful, sturdy and durable.
3. Guide rails with high-quality bearings ensure that a single drawer can be easily and smoothly opened and closed when subjected to the rated load.
4. The freely adjustable partition inside the drawer allows you to separate the storage space at will. Lined drawers protect against stains and spills.
5. Toolboxes located on the top of the unit offers extra space for projects.
6. Record board included for better tool organization options.
7. Push handle for comfortably moving the unit.
8. Thanks to the smooth-running fixed and swivel Castors (two of each) in solid rubber, it has full mobility.
9. Safety catch to prevent the drawers from falling out and anti-tilt mechanism to prevent the opening of more than one drawer at a time.
Rolling Tool Cabinet with Tool Hanging Board
Features
1. The frame prevents tools from slipping. Rubber protects paint will not get hurt.
2. Big label, Safety lock, Slots can be used with spacers, Can adjust the space inside the drawer freely.
3. Three class hook up, Place Tools, Easy to take, The back panel is designed with precise square holes.
4. Precision control safety lock, sturdy and durable, low failure rate. The handle is pretty and practical.
5. It uses 100mm polyurethane wheels, the movement is lighter and more flexible. With two orientations, two universal brake wheels.
6. The top of the cabinet can be equipped with: green stripe rubber, rim, board, square hole hanging board or louver hanging board, increase the use of tool cabinet.
7. Equipped with a square hold hanging plate for the back drawer. It is equipped with polyurethane casters with a diameter of 100mm and a single rail.
8. Protective edge bumpers absorb damage that can be caused by vehicles and other large heavy items in the workplace.
Large Capacity Mobile Tool Cabinet
Features
1. This table uses 100mm polyurethane casters, single guide rail, central locking system with the interlocking device, green veneer.
2. The drawer adopts special guide rails to take up the weight. The bearing is used between the drawer and the guide rail, and the push and pull is flexible and smooth.
3. The horizontal and vertical partitions in the drawer can be freely adjusted and can be separated to store different sizes of items. It can also be separated by a unitized parts box.
4. The drawer is equipped with a limit device that can be pulled out completely without falling off: it can also be equipped with a safety buckle so that the drawer does not slide out by itself, and it is safe and reliable to use.
5. The entire tool cabinet drawer is locked with a lock on all drawers, which is quick and easy to use.
6. The top of the rolling tool cabinet can be equipped with: green stripe rubber, rim, board, square hole hanging board or louver hanging board, increase the use of tool cabinet.
7. Large, push-bar side handle has a rugged, knurled finish and can be mounted on either the left or right side of the cabinet.
8. Rubber corner bumpers and aluminum edge guards help protect it from accidental damage.
Our Vacuum Oil Purifier (also known as Oil Dehydrators, Oil Reclaimers, and Oil Distillation Systems), are made to combine simple operation with high performance, creating more value for your investment. The main purpose of a Vacuum Oil Purifier is to remove contamination from refined petroleum oils and other liquid hydrocarbons. These petroleum products are used in many different industrial, marine, and aerospace processes (including hydraulic systems using fluid power, lube oil systems and bearings, and gears and storage facilities, like tank farms). In petroleum oils like these, you will most often find contaminants like water, gas, lighter hydrocarbons, particulate matter, or even process seal leaks from steam turbine seals or compressor seals. Contamination may also be introduced into certain systems through contact with the environment, the atmosphere, and transfer of product from other contaminated sources like tanks, reservoirs, pipelines, and barrels. Our Vacuum Oil Purifiers and Filtration Systems were developed specifically to solve this wide array of contamination issues seen so frequently within refined hydrocarbon and petroleum products. The reason Vacuum Oil Purifiers are so effective in removing most forms of contamination is because they use both a vacuum and a specific temperature setting to expel contaminants in the form of a gas, while the desired petroleum product remains as it is in its original liquid form. A typical vacuum is set at -25\” Hg or higher, with the temperature raised to 150 degrees Fahrenheit. At this setting, most contamination will be evaporated off into the atmosphere and can later be condensed back into a liquid or gas.
One of the aspects of successful development of each business is the implementation of innovations. We all are searching every day of new resources to obtain more profits. There exist the materials which can be used again and again but because of the shortage of equipment or knowledge we cannot use it on 100%. how many tons of used oil recycling by oil recycling machine are disposed every year? How many damages do we bring to our environment? Stop throwing out your profit into wastes, start recycling and you will obtain the benefits. So, how can we obtain the benefit from this type of wastes? Today’s technologies of oil recycling allow restoring almost all used oil recycling machine. We offer you to familiarize with mineral oil regeneration technology. Regeneration does more than restore the oil to its original, new condition. The cost for the regeneration of 1 ton of oil is less than the cost for new oil. Besides, regenerated or recycled oil can be more effective to compare with new oil. For the restoration of used oils can be applied to various technological operations which are based on physical, physicochemical and chemical processes. All these methods were created for cleaning oil from different contaminants and aging products.
Our Vacuum Oil Purifiers (also known as Oil Dehydrators, Oil Recycling machine, and Oil Distillation Systems), are made to combine simple operation with high performance, creating more value for your investment.
The main purpose of a Vacuum Oil Purifier is to remove contamination from refined petroleum oils and other liquid hydrocarbons. These petroleum products are used in many different industrial, marine, and aerospace processes (including hydraulic systems using fluid power, lube oil systems and bearings, and gears and storage facilities, like tank farms).
In petroleum oils like these, you will most often find contaminants like water, gas, lighter hydrocarbons, particulate matter, or even process seal leaks from steam turbine seals or compressor seals.
Contamination may also be introduced into certain systems through contact with the environment, the atmosphere, and the transfer of products from other contaminated sources like tanks, reservoirs, pipelines, and barrels.
Our Vacuum Oil Purifiers and Filtration Systems were developed specifically to solve this wide array of contamination issues seen so frequently within refined hydrocarbon and petroleum products.
The reason Vacuum Oil Purifiers are so effective in removing most forms of contamination is because they use both a vacuum and a specific temperature setting to expel contaminants in the form of a gas, while the desired petroleum product remains as it is in its original liquid form.
The main purpose of a Vacuum Oil Purifier is to remove contamination from refined petroleum oils and other liquid hydrocarbons. These petroleum products are used in many different industrial, marine, and aerospace processes (including hydraulic systems using fluid power, lube oil systems and bearings, and gears and storage facilities, like tank farms).
In petroleum oils like these, you will most often find contaminants like water, gas, lighter hydrocarbons, particulate matter, or even process seal leaks from steam turbine seals or compressor seals.
Contamination may also be introduced into certain systems through contact with the environment, the atmosphere, and the transfer of products from other contaminated sources like tanks, reservoirs, pipelines, and barrels.
Our Vacuum Oil Purifiers and Filtration Systems were developed specifically to solve this wide array of contamination issues seen so frequently within refined hydrocarbon and petroleum products.
The reason Vacuum Oil Purifiers are so effective in removing most forms of contamination is because they use both a vacuum and a specific temperature setting to expel contaminants in the form of a gas, while the desired petroleum product remains as it is in its original liquid form.
For used dirty oil recycling, these units are the ultimate oil purification which integrates total completed oil recovery and recycling system into one unit. This oil recycling machine contains free water & sludge separating, vacuum jet dehydrator, pre-treatment filtration, chemical treatment and dirty & clean oil storage tanks. China Oil purifier develops its own proprietary software programs to provide this high level of automation control technology. The remote control operation is optional for this series.
The series is designed for customers who wish to install the In-house Used Black Oil Recycling Machine that does not rely on the outside or on-site dirty oil re-refining service which the oil quality is unpredictable when your oil is processed by outside service. This on-site oil cleaning service is very expensive. This service normally charges about 1/2 price of new oil or US$1.50 to $3.50 per gallon depending on the new oil cost.
For waste oil recycling, Yuneng also develops oil decolorizing process that uses proprietary chemicals to completely wash out all bad oil additives and oil chemical by-products from waste oil. This process will reconstitute and brighten up oil colour in most used lubricants. New oil additives and neutral base stock can be refortified to this decolourized oil so oil becomes renewable as new oil quality.
YSmarines is one of the most professional marine anchor suppliers in China, superior quality, fast delivery, reliable price guaranteed, with an expert team. More weights and dimensions could be customized available at YSmarines, professional certificated with DNV-GL, BV, ABS, LRS, RINA, IRS, etc.
Spek Anchor
Spek anchor is one type of the stockless anchor. It is the improved anchor with a lower point of gravity from the hall anchor, whose core of anchor head is located in the center of the pin centerline to the bottom. The structure of spek anchor is characterized that there is anchor crown plate and reinforcing ribs at the anchor crown. The anchor claw is easy to turn to the ground and then has a better stability. The smart design makes it a perfect fit for the anchor pocket. And the anchor flukes will keep naturally upwards and overturn immediately when touching the hull plate to avoid damaging the shell plating.
JIS-F3301 Stockless Anchor
The JIS stockless anchor is made according to the Japanese industrial standard JIS-F3301. It is a normal type of stockless anchor with a small ball on a fluke. With the stockless design, it fits the anchor pocket perfectly. It is commonly used in commercial vessels and recreational craft. It is made high quality cast carbon steel and is a great mooring device for fishing boats due to the large holding power and easy storage.
Hall Stockless Anchor
The hall anchor is the most commonly used conventional stockless anchor and it is one of the most popular anchors designed to fit anchor pockets on most ships. The traditional design makes a stable working performance of the anchor. It is stowed against the shell or frog eye. The hall anchor provided by YSmarines can be used for various types of small boats and the commercial shipping industry with IACS certificates.
Delta Flipper High Holding Power(HHP) Anchor
Delta flipper anchor is a superior high holding power anchor with its easy handling and rapid penetration in different soil conditions and is well known worldwide. The HHP anchor has an open construction for smooth penetration in different kinds of soil and no rotation, which means no decrease of holding capacity and no dragging of the anchor. It is manufactured from high tensile steel. It normally used in the offshore project with high holding power.
High Holding Power (HHP) Danforth Anchor
Danforth anchor is the high holding power anchor associated with Danforth Standard. It is a well-known HHP anchor in the offshore, dredging and shipping sectors. The shank is made of high strength steel and the flukes are strong and wide. Sometimes, it will be required hot-dipped galvanized coating for long protection. The lightweight and compact flat design make it easy to retrieve and relatively easy to store. The anchor can be disassembled for storage and it features an adjustable 32° and 45° shank/fluke angle to improve holding capability in common sea bottoms such as hard sand and soft mud.
AC-14 High Holding Power(HHP) Anchor
AC-14 anchor is a stockless HHP anchor with wide anchor crown, thick and long flukes, and longitudinal ribs. It is available in a self-colored finish or in a galvanized finish. Its design provides excellent weight to performance ratios. The lighter weight which is 25% weight reduction compared to conventional anchors and high holding power makes it good stability and then it is commonly used as the main anchor on large container ships, the car carries and supertankers. It has an excellent performance in a variety of soils.
High Holding Power (HHP) Pool Anchor N Type
Pool anchor is one type of stockless high holding power anchor. It is used as a bow anchor when sailing. Its weight can be lighter by 25% than standard weight.N-type HHP pool anchor is designed to fit into small anchor pockets on modern ships and the hollow flukes are welded from two plates to create strong anchoring performance under various circumstances. This construction gives the anchor a large resistance against bending forces. The applications of the pool anchor are large yachts, cruise vessels and container vessel ships.
High Holding Power (HHP) Pool Anchor TW Type
Pool anchor TW is one type of stockless high holding power anchor. The TW type pool HHP anchor has more than 2 times holding power than the conventional anchor of the same weight. The anchor has large flat flukes made out of high tensile steel plate material. The thickness varies from 15 mm up to 140 mm depending on the anchor size. It allows a weight reduction of 25% compared to a conventional anchor for the same equipment number It has a fully balanced type and unbalanced type. The fully balanced type always has its flukes in a vertical position while lifting the anchor. The unbalanced type will tip over to one side.
Mushroom Mooring Anchor
Mushroom mooring anchor is mainly used for buoying, light boat, beacon vessel, wood bridge. The anchor provides an extremely secure mooring. It is also perfect as a drag anchor for fishing or for holding small buoys and markers. This style of boat anchor is made of steel AZG200-400C. The surface of the anchor could be or hot dip galvanized or painted an as white, red, yellow and deep blue. It has the advantage of being counterweighting, a more aggressive biting edge, and a larger bell diameter that greatly improves holding power.
Folding Anchor
The folding anchor has four flukes and the fakes could be folded. It could be used on a beach, lake, inland river and shallow sea. The material of the anchor will be stainless SS316, stainless steel SS304 or steel Q235. The weight will be 2KG to 50KG. The anchor is easy to fold and unfold using a locking system and it locks shut for easy anchor storage or locks open when the anchor has been weighed overboard.
Bruce Claw Anchor
Bruce claw anchor is mainly used for a yacht or small boat. The material of the anchor will be SS316 or steel Q235 as required. The weight will be 2KG to 50KG with the surface of mirror polishing or hot galvanized. Due to its simple construction, the claw anchor is relatively inexpensive when compared to other styles of anchors. Being the shape of an open claw, the design intent was to allow the anchor to tip in any direction when it reaches the bottom and still be able to set properly. The anchor sizing assumes average boat characteristics in average anchoring conditions.
Sanji-first is a professional mobile tool cabinet manufacturer, providing service before and after purchase, give a 100% satisfaction guarantee. The rolling tool chests supplied by Sanji-first, have various sizes with durable construction. They can be widely used in the workshop, production worksoace, office, utility room or craft area.
Mobile Tool Cabinet with Tool Hanging Plate
Features
1. The top of the cabinet can be equipped with: green stripe rubber, rim, board, square hole hanging board or louver hanging board, increase the use of tool cabinet.
2. It’s equipped with polyurethane casters with a diameter of 100mm and a single rail. The drawer can be pulled out by 85% and has a load capacity of 80kg/drawer. The single door cabinet is equipped with a layer of adjustable partition with a load capacity of 30kg/layer.
3. Customizable to fully meet user requirements.
4. Optional on the top of the cabinet to increase the use of the tool cabinet.
5. Full mobility thanks to the smooth-running fixed and swivel Castors (two of each) in solid rubber.
6. It can be utilized to the full since drawers can be fully extended and drawer shell heights are optimized.
7. Additional storage space and work surface through hard-wearing wooden cover or non-slip plastic cover with compartments for small parts.
Mobile Tool Cabinet with Small Desktop
Features
1. The rolling tool chest has precision control safety lock, sturdy and durable, low failure rate.
2. The handle is pretty and practical.
3. The drawer adopts special guide rails to take up the weight. The bearing is used between the drawer and the guide rail, and the push and pull is flexible and smooth.
4. Full mobility
Thanks to the smooth-running fixed and swivel castors (two of each) in solid rubber.
5. Can be utilized to the full
Since drawers can be fully extended and drawer shell heights are optimized
6. Additional storage space and work surface
Through hard-wearing wooden cover or non-slip plastic cover with compartments for small parts.
7. Absolutely safe to work
Central locking and single drawer opening or double protection against accidental opening when in motion.
8. Flexibly adaptable
Through perforated side and rear panels for holding accessories and tool hooks.
9. Extremely user-friendly
With robust, ergonomic push handle.
Material Mobile Tool Cabinet
Features
1. The cabinet adopts a three-piece lap joint design, which is made of high-quality cold-rolled steel plate by advanced CNC equipment, such as shearing, punching, folding and welding, and is surface-treated by advanced automatic electrostatic spraying process, which is beautiful, sturdy and durable.
2. Configure the central locking system, interlock device.
3. The frame prevents the tool from slipping. Rubber protects paint will not get hurt. Big labels, safety lock, slots can be used with spacers.
4. Large push bar, steel tubular side handle.
5. Deep cabinet for a larger work surface and storage capacity.
6. Premium drawer liners included.
Mobile Tool Cabinet with Flat Drawer
Features
1. All welded steel construction with a tough, rust-resistant powder coat paint finish.
2. The drawer adopts special guide rails to take up the weight. The bearing is used between the drawer and the guide rail, and the push and pull is flexible and smooth.
3. 2 full-extension ball-bearing drawer slides support up to 140KG and the roller cabinet tool chest features a secure latch retention system that ensures your drawers are completely closed and secured.
4. The entire tool cabinet drawer is locked with a lock on all drawers, which is quick and easy to use.
China manufacturers 